REQUEST A QUOTE

This product is specifically designed for solidification and stabilization of saline wastewater, high-TDS industrial effluents, sludge, and liquid wastes, where conventional SAPs show severe absorption loss.

Key Features & Benefits

✔️Excellent salt resistance

✔️High absorption under high TDS conditions

✔️Stable gel formation in saline wastewater

✔️ Efficient solidification of liquid waste

✔️ Reduced dosage compared to conventional SAP

Request A Quote

Saline Wastewater Solidification Polymer

Product Name：ST-160

Property	Specification
Appearance	White or light yellow granular
Particle Size	10-60 mesh
Water Absorption Capacity (25℃)	≥350 times (deionized water)
Solubility	Insoluble in water; swells to form a gel

Typical Applications

Saline & High TDS Liquid Waste Solidification: Saline wastewater solidification; High TDS liquid waste stabilization; Brine, concentrated salt solution immobilization.

Sludge & Semi-Liquid Waste Stabilization: High-moisture sludge solidification; Odor and leachate control during sludge handling.

Mining Waste Treatment: Drilling waste solidification; Fracturing flowback & produced water treatment; Mining wastewater treatment; Tailings slurry immobilization.

Chemical Spill & Hazardous Liquid Containment: Salt-containing chemical spill containment; Hazardous liquid immobilization; Emergency liquid spill response; Safe handling and transport of liquid waste

Packaging

20 kg kraft /800kg jumbo bags with PE inner liner

Customized packaging available upon request

Storage & Handling

Store in a dry, sealed condition. Non-hazardous material.

Shelf life: 24 months under recommended storage conditions

FAQs about ST-160

1. What is ST-160?

A superabsorbent polymer (SAP) granule (white/light yellow, 10–60 mesh) for solidifying saline and high-TDS liquids.
2.How much does it absorb?

≥350x its weight in deionized water at 25°C; forms a stable gel. Absorption decreases with salinity but remains effective.
3. Why use it in salty/high-TDS waste?

Excellent salt resistance, stable gel in saline water, and lower required dose vs. conventional SAPs.
4. Typical applications?

Brine/high-TDS waste, sludge stabilization, drilling waste, flowback/produced water, tailings slurry, and chemical/hazardous spill containment.
5. Packaging and storage?

20 kg kraft bags or 800 kg jumbo bags (PE liner). Store dry and sealed. Shelf life: 24 months.
6. Any usage notes?

Dose varies by salinity and waste composition; perform on-site tests. Keep product dry to prevent premature swelling.

Get Free Sample

REQUEST A QUOTE

Saline Wastewater Solidification Polymer

Product Name：ST-160

Typical Applications

Packaging

FAQs about ST-160

Contact Us

Subscribe To Our Newslatter

Product

Message